A blast plan, should include, but not be limited to, the following:

• Location of the proposed blasting.
• Description of the proposed blasting.
• Permits / licences required for the project.
• Identification and position of the person responsible for the project including project safety and security.
• Identification and position of person who has given approval to use explosives on the project.
• Key appointments and responsibilities.
• Shotfirer’s details.
• Details of the risk management assessment.
• Details of adjacent structures or services that influence the blast design.
• Details of reports, drawings and records consulted.
• Layout plan of the blast including drilling pattern and hole depths.
• Detonation sequence / effective charge mass per delay (MIC) / powder factor.
• Type of explosive to be used and quantity required.
• Method of initiation.
• Type of firing equipment and procedures.
• Drilling procedures.
• Explosive loading and charging procedures.
• Explosive storage and handling procedures.
• Security procedures for the site and the blast, including explosives.
• Environmental considerations for airblast overpressure, ground vibration.
• Details of communication systems.
• Warning procedures.
• Traffic management plan.
• Proposed dates and times of blasting.
• Details of the exclusion zone.
• Method of notification to owners and occupiers of structures, and providers of services adjacent to the blast.
• Influence of weather.
• Loading in poor light conditions or reduced visibility.
• Cessation of explosive-related activities during electrical storms.
• Misfire management system.
• Post blast assessment and inspection procedures.
• Provision for post-blast comments.
• Signature spaces for the plan author, shotfirer and person who approves the plan.