Glossary

Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL
T |
|---|
ToeThe junction of the face and the floor. Also, unbroken rock remaining at the junction of the face and floor. | |
Top fire percussion detonatorA top fire percussion detonator is designed to function without any electrical connection. Fires from the top of the gun.
| ||
Topfire DetonatorOwen Oil Tools’ Resistorized Bridge Detonators are designed to detonate when an electrical current greater than 0.2 amps is applied. The 008 Top Fire Detonator is a resistorized electrical detonator manufactured to API RP-67 recommendations and employs a 51 Ohm resistor in the firing circuit. It is designed to be used in hollow steel carrier or scalloped gun systems in a top-fire application where the detonator has a directional output designed to initiate a bi-directional booster.
| |
Tramp Material (Foreign Bodies)Tramp Material (Also known as Foreign Bodies) not intended to be present in a process (such as bolts, nuts, gravel, etc), that can have an adverse effect on the process and may cause an undesired event or deviation from the design intent. | |
Trapeziod | ||
Trunk LineThe surface line of detonating cord or signal tube between connecting blast holes. | ||
Trunk Line DelaySignal tube based unit which provides connection and delay from one blast hole to the next.
| ||
Tube Cutter DetonatorDetonator designed to initiate tube cutting charges.
| |
Tubeveyor | |








